A Barrett company - serving San Jose, CA
A living room with a wall of new windows and a sliding glass door

Windows & Doors Troubleshooting: Common Problems and How to Fix Them

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in San Jose

Last updated November 18, 2026

New double-hung windows in a dining room
A new front entry door with glass sidelights
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
A new front yard fence with a matching gate
A new paver pool deck
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Windows & Doors Troubleshooting: Common Problems and How to Fix Them

A door that sticks in January and swings free by June isn’t a hardware problem. It’s the building moving, and no amount of caulk will stop it. We’ve pulled hinges off doors in San Jose homes where three previous “fixes” had been stacked on top of each other, all of them treating the symptom while the actual cause, a settling foundation corner or a racked frame, kept doing its work. The good news: most window and door complaints trace back to one of two things, either a detail that was wrong at installation or a maintenance step that got skipped. Sort that out and you’ll know whether you’re facing a $30 fix or a $3,000 replacement.

Call (844) 320-5918

Quick Answer

Most window and door problems come from one of four root causes: the original installation detail (flashing, shimming, sealing), seasonal building movement, skipped maintenance like painting and hardware lubrication, or a failed glass seal inside a sealed unit. Diagnose the cause before you buy parts or call anyone. Condensation between panes means the glass unit failed. A draft at a corner usually means the rough opening wasn’t sealed correctly, not that the window is bad. Water intrusion requires checking the head flashing before the frame.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Table of Contents

Symptom-to-Cause Diagnostic Chart

Start here. Match your symptom to the likely cause before you pick up a tool. This chart is the fastest way to save money because it stops you from replacing a window when the real problem is a $12 tube of sealant, or resealing a frame when the glass unit itself is shot. Our crew members have up to 28 years of experience, and this is the same triage they run on the first visit to a San Jose home.

  • Condensation or fog between the panes: The insulated glass unit (IGU) seal failed. The window frame is usually fine. This is a glass-unit issue, often a warranty claim.
  • Draft at the corners or along one edge: The rough opening wasn’t insulated or sealed correctly at install, or the corner seal has degraded. Usually an installation or maintenance detail, not a bad window.
  • Water staining on interior drywall below the window: Head flashing or the weather-resistive barrier is the prime suspect, not the window sash. Diagnose outside first.
  • Door sticks seasonally, binds at top or latch side: Building movement, foundation settling, or frame racking. Hardware is rarely the cause.
  • Door drags on the threshold or sags at the latch: Hinge fatigue or loose screws that have stripped their holes. Often a hinge and jamb repair.
  • Window crank turns but the sash doesn’t move: Operator mechanism wear on casement and awning units. A replaceable part, not a new window.
  • Water behind the siding, no visible interior leak yet: Missing or reversed flashing detail. Catch it before it rots the sheathing.

San Jose’s climate makes one of these far more common than people expect. Our dry summers and wet winters swing the wood in older homes through a wide moisture cycle, so a door that fit in September can bind by February. That’s the building at work, not a defect.

Condensation Between Panes: Warranty Claim or Install Problem?

Fog between the panes means the sealed glass unit failed, and that’s a glass-unit problem, not an installation problem. The double-pane assembly has a perimeter seal that holds an inert gas or dry air between the panes. When that seal breaks, moisture gets in and the unit fogs from the inside. No amount of cleaning touches it because the condensation is sealed inside the glass sandwich.

Here’s the distinction that decides whether you pay or the manufacturer does:

  • Glass-unit seal failure (usually warrantied): Fog or condensation trapped between the panes, no visible damage to the frame, no water staining around the opening. Most quality window brands, including the Andersen and Marvin lines we install, cover this under a glass-breakage or seal warranty for a set number of years. Check your paperwork.
  • Flashing or installation problem (not a glass warranty): Water gets behind the unit and enters from the top or sides, staining the frame, drywall, or sill. The glass itself is fine. The manufacturer will decline this claim because the water is coming from outside the unit, not from a failed seal.

If you’re not sure which you have, look at where the moisture sits. Fog trapped inside the glass is a seal failure. Water running down the interior face of the glass, or pooling on the sill, is an install or flashing problem. In San Jose, we see the second kind more often on homes built during the tract boom, where the flashing detail was skimped and only shows up after a hard winter rain.

Drafts at Corners and Edges

A cold draft at the corner of a window is almost never a sign the window itself is failing. It’s a sign the rough opening wasn’t sealed, or the seal has aged out. The window sash sits inside a frame, and the frame sits inside a rough opening cut into the wall. If the gap between the frame and the framing isn’t insulated and air-sealed, cold air from the wall cavity and outside gets pulled in along that path. The window gets blamed. The wall is the culprit.

How to tell the difference before you call anyone:

  1. Check the corners first. Run your hand along the interior trim corners and the meeting rail on a windy day. Most drafts concentrate at four points: the top corners and the lock side.
  2. Look for daylight. A visible hairline gap between sash and frame means a weatherstripping or alignment issue, not a wall-seal issue.
  3. Feel the wall around the frame. If the draft comes from the trim or the drywall joint near the window, the air is traveling through the rough opening. That’s an installation or maintenance fix, often $30 to $150 in materials rather than a new window.
  4. Test the latch and lock. A sash that doesn’t pull tight against the weatherstripping will feel drafty even when everything else is right. Sometimes a lock adjustment solves it.

In San Jose homes with original single-pane aluminum windows, drafts are common but the fix isn’t automatically replacement. Air-sealing the rough opening, replacing worn weatherstripping, and adding a quality storm panel can cut the draft for a fraction of a full window replacement. If you’re already remodeling or adding on, though, the math changes, and that’s worth a conversation. For bigger structural work like a bump-out or an accessory unit, our team handles Home Additions & ADU in San Jose and can tie the window scope into the overall plan.

Water Intrusion: The Right Order of Diagnosis

Water intrusion is where homeowners waste the most money, because they start at the window frame and work outward when the real problem is almost always above. Water runs downhill. If you have a stain on the drywall below a window, the source is at the top of the opening, the head flashing, or higher up on the wall. Replacing the window because the frame looks wet fixes nothing if the flashing above it is wrong. The leak continues after the new window goes in, and now you’ve paid twice.

Diagnose in this order:

  1. Start at the head (top) of the opening. The head flashing and the weather-resistive barrier behind the siding at the top of the window is the number one source of leaks. Look for missing, taped-over, or reversed flashing. Reversed lap direction is a classic installation error and lets water wick in behind the unit.
  2. Then the sides (jambs). Check that the jamb flashing laps over the head flashing below it, not under. Water needs a path to escape to the exterior.
  3. Then the sill. The sill pan or sloped sill should shed water outward. Flat or back-sloped sills trap water against the frame.
  4. Last, the glass and sash gaskets. Only after the flashing and the rough opening are ruled out do you suspect the window unit itself.

That order isn’t arbitrary. Flashing and rough-opening failures account for the large majority of window leaks, and they’re the cheapest to fix. Glass gasket failures are rarer and mostly covered by warranty. If you’ve already got water inside, don’t wait for the cheap diagnosis to become a rotted sheathing repair. Our team handles this kind of scope all the time and includes it in a Barrett & Sons Construction San Jose home walkthrough when it comes up. And because the whole point is getting the detail right before siding goes back on, a permit and inspection on eligible jobs backs it up.

Door Alignment Troubleshooting by Root Cause

A door that won’t close right has one of four causes, and each needs a different fix. Picking the wrong one is how a weekend project turns into a two-week ordeal. Test before you tighten anything.

1. Foundation settling. If the door binds at one corner and the floor near it feels out of level or shows a crack radiating across the slab, you likely have a settling or heaving issue. On a San Jose slab-on-grade home, this is more common than people realize. Tightening hinges won’t fix it. The right move is a foundation inspection; the door is just the messenger.

2. Hinge fatigue. A heavy door on three hinges sags over time, especially if the house has been through dozens of seasonal cycles. Look for a gap at the top latch side and a binding point at the bottom. Screws that won’t tighten (they spin in stripped holes) are a sign the jamb wood has loosened. A hinge and jamb repair, or adding a fourth hinge, often solves it for good.

3. Frame racking. If the whole frame is out of square, the door binds top and bottom on the same side. This is a structural issue, not a hinge issue, and often ties to settling or a wall that has shifted. A repair can bring the door back into a working range, but if it keeps recurring, the frame’s the problem, not the door.

4. Seasonal wood movement. The classic San Jose symptom: sticks in winter, swings free in summer. Wood absorbs moisture in our wet months and swells; it dries out and shrinks in summer. Most homes benefit from a seasonal adjustment, but if the swing is more than about a quarter inch over the year, you’re likely also dealing with a settling or framing issue underneath.

To get the door right the first time, the diagnosis has to come before the repair. In our experience, half the doors we’re called out on get the wrong fix on the first pass. For anyone thinking about a new door as part of a bigger update, the team here installs Andersen and Marvin on the window side and can match a door scope to the rest of the finish. On the fence and hardscape side of your property, the same principle applies, so it’s worth a look at Fence Installation in San Jose if your gate is following the same seasonal tilt.

Windows That Stick or Won’t Operate Smoothly

Sticking windows are almost never the glass. The moving parts, the tracks, rollers, operators, and weatherstripping, are what cause trouble. Before you assume the window is failing, work through the operating system.

  • Sliders and double-hungs: Grime and dust build up in the track and on the rollers. A clean track and a drop of silicone spray (never a petroleum lube) on the rollers brings most back to smooth.
  • Casement and awning units: The crank operator is a wearable part. If it grinds or binds, the operator needs replacing. Most are accessible from the inside without removing the window.
  • Double-hungs that bind halfway: A worn balance or a sash that has gone out of square inside the frame. Sometimes a sash re-seat or balance replacement does it.
  • Aluminum sliders: The felt weatherstripping wears thin, the frame allows the sash to lift out of track, and the unit starts dragging. A weatherstrip replacement and track repair are usually enough.

Don’t force a stuck sash. Repeated brute force bends the frame and cracks the glass, and then you’re into a replacement that was avoidable. If a window has been stuck for a long time and you’re also seeing condensation inside the glass, you probably have more than one issue, and that’s worth a professional look.

Temporary Repair vs. Honest Replacement Recommendation

Some repairs are honest fixes. Others are bandages holding a bigger problem together. Here’s how to tell which you’re looking at, because the answer changes what’s worth spending.

  • Repair holds when: the window frame is solid, the surrounding wall and flashing are dry, and the problem is a wear item, a seal, a hinge, an operator, or a stuck track. Those are $30 to $300 fixes and they last.
  • Repair is temporary when: the fix is sealing over a leak you haven’t found, tightening a hinge on a frame that’s still moving, or patching rot you can see around the opening. You’re buying months, not years.
  • Replacement is honest when: the frame has structural rot at the sill or jambs, the glass unit has failed AND the frame is out of warranty age, several units in the same home show seal failure (a batch problem), or the windows are original single-pane aluminum and you’re facing repeated repairs with no improvement in comfort or energy bills.
  • Replacement buys you peace of mind when: the whole wall or opening is being re-sided or re-framed anyway. At that point the window replacement cost is mostly the glass and labor, since the wall is open. Wait, and you pay twice.

The honest call isn’t always the bigger job. Sometimes the right answer really is a $30 tube of sealant. When it’s a larger scope, though, we’d rather say so than sell a repair that fails next winter. And when the driveway has also taken it on the chin from a bad drainage detail, that’s a similar conversation, which is what our Driveway & Pavers in San Jose page covers.

Common Mistakes to Avoid

  • Caulking over a draft instead of finding the source. A bead of caulk on the interior trim won’t fix an unsealed rough opening, and it hides the problem from the next person who looks. In San Jose, this is the number one “fix” we undo.
  • Starting water intrusion diagnosis at the window. The leak is almost always at the head flashing. Chasing the glass first wastes the visit and often the money on parts you didn’t need, like a replacement sash.
  • Replacing the window when only the glass unit failed. Modern windows allow the sealed glass unit to be swapped without replacing the frame. If the frame is sound, that saves a lot of money and keeps the original detail.
  • Filing a glass warranty claim on a flashing leak. The manufacturer will decline it, and you’ll have burned weeks before going to the person who should have looked at it first. Read the warranty before you assume it’s covered.
  • Forcing a stuck window or door. A bent frame or cracked glass turns a cheap repair into a full replacement. Stop and diagnose.
  • Ignoring a pattern across multiple windows. One failed unit is a glass issue. Four failed units on the same house point to an installation or batch problem, and the fix is different.
  • Hiring a fix without a written scope. If a handyman or contractor won’t put the scope, the brand, and any price change in writing before work starts, walk. That’s true whether the job is a window repair or a whole re-side.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

When to Call a Professional

Call a pro when you have structural water intrusion, when the door binding turns out to be a foundation or frame racking issue, when multiple windows have failed glass seals at once, or when the fix requires pulling the unit and re-doing the flashing detail. Those aren’t weekend projects, and the wrong fix makes the next repair more expensive. Also call when a door has been adjusted once already and keeps coming back out of alignment, because the real cause is underneath. Barrett & Sons Construction San Jose offers free estimates in San Jose. Our technicians have up to 28 years of experience, and every eligible job includes permits pulled and inspections signed. Call (844) 320-5918 to schedule your free estimate.

Frequently Asked Questions

The Bottom Line

A new bay window with a cushioned seat

Window and door problems are almost always symptoms of one of four causes: the original installation detail, seasonal building movement, a skipped maintenance step, or a failed glass seal. Diagnose the cause before you buy parts. Start water intrusion at the head flashing. Separate a glass-unit seal failure from an install or flashing problem before you file a warranty claim. Judge a repair as honest only if it addresses the cause rather than sealing over it. And if the underlying condition is structural, be honest with yourself about replacement. If you’re in San Jose and you’d rather have an experienced eye on it before you spend, call us.

Barrett & Sons Construction San Jose is the owner-operated, name-on-the-truck alternative: a live person answers the phone 24/7, every eligible job gets permits and inspections, and every completed job is backed by the written 90-Day Done Right Promise. Our published standing offers include $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount. Call (844) 320-5918 to schedule your free estimate.

Written by the team at Barrett & Sons Construction San Jose.

Getting started with Barrett in San Jose

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your San Jose team

A local vetted partner works across San Jose and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in San Jose? Licensed & insured · free written estimates
Call (844) 320-5918
Local Service Coverage

Request a Free Estimate in San Jose

Tell us what you need - Barrett & Sons Construction San Jose responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch