







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Jose Homeowners Choose KraftMaid Construction
Barrett & Sons Construction San Jose provides independent KraftMaid cabinet service and installation across San Jose: hanging new KraftMaid runs, reworking sagging drawer boxes, refacing tired fronts, and matching new cabinets to existing KraftMaid layouts. We work on KraftMaid every month, so we know how the line’s boxes, glides and finishes actually behave in this climate. We’re an independent provider, not authorized, sponsored or endorsed by KraftMaid. Call (844) 320-5918 for a free estimate.

What sets our KraftMaid work apart is as simple as it is uncommon: every scope, every allowance and every price change reaches you in writing before anything gets torn out or hung.
Why Trust Barrett & Sons Construction San Jose for Your KraftMaid Construction?

Our crew members have up to 28 years of experience and have worked on enough KraftMaid boxes to know what’s inside them without pulling a drawer apart. That matters because KraftMaid isn’t one product. A Vantage base is all-plywood with a dovetail drawer; a Choice base is a particleboard box with a stapled drawer. Those are different cabinets with different failure habits, different screw-holding strength and different repair paths. Treating them the same is how a small fix turns into a cabinet replacement.
We fit genuine KraftMaid replacement glides, hinges and door fronts when the line and finish are still in production, and quality aftermarket hardware when they aren’t. We’re careful about warranty too: replacing a hinge with a factory-matched part doesn’t jeopardize your coverage, but cutting into a cabinet box or drilling it for new hardware in the wrong spot can. Every eligible job gets permits pulled and inspections signed, every price change comes as a written change order before work moves, and every finished job is backed by our written 90-Day Done Right Promise. One call and Tom comes back to make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in San Jose
- Drawer glide sag and roller failure. On older Vantage and Choice drawer boxes, the roller glides wear out first, and wide pot drawers make it worse because they’re the ones everybody overloads. You’ll feel it as a drawer that drops a little when you pull it open and catches on the frame going back in. Replacement glides or a switch to a heavier-duty slide usually solves it.
- Hinge screw pull-out in particleboard or MDF boxes. Repeated seasonal expansion and contraction loosens the wood around the hinge screws, and eventually a door sags or won’t sit flush. San Jose’s dry summers compress that material hard, so the screws lose bite faster here than owners expect. The fix is a proper insert, a longer hinge plate or a relocated screw position, not a bigger screw jammed in the same hole.
- Finish checking, yellowing and paint crazing. Painted and stained maple fronts take the worst of it near the range and sink, where heat and moisture cycle against the finish day after day. You’ll see fine cracks in the paint and a slightly yellowed cast on older maple. We can often address the fronts without replacing the whole run.
- Out-of-square or racked wall cabinets. A lot of San Jose cabinet installs went onto older wall framing that was never truly straight, so the boxes racked over time. Doors rub, the gaps between fronts go uneven, and the fix isn’t new doors; it’s re-shimming the box to plumb and re-aligning the reveals.
- Worn or mismatched door fronts after a partial replacement. When one door gets damaged and the finish is no longer in production, matching the new one to fourteen-year-old maple takes patience and a real sample. We order samples before committing you to anything.
KraftMaid Parts & Our Repair-vs-Replace Approach

Parts get sourced per job. We order genuine KraftMaid glides, hinges and fronts to match your exact line and finish, and we’ll tell you honestly when a part is discontinued and an aftermarket equivalent is the better call. No claim that any of it sits in local stock, because it doesn’t.
Repair versus replace is a judgment call, and we make it in front of you. If it’s glides and hinges on sound boxes, we fix the hardware and you keep your cabinets. If the boxes are soft, the finish is failing across the run, and you’re chasing parts that no longer exist on a 20-year-old cabinet, refacing or a partial swap beats throwing money at it. A typical KraftMaid job starts with a homeowner whose doors have started to rub and whose wide drawers droop, usually a mix of worn roller glides on the original boxes and wall cabinets that were never shimmed square. A qualified local pro checks plumb and level across the run, replaces or upgrades the hardware, re-hangs or re-shims the boxes, and then aligns every door and drawer front so the reveals close evenly before any new countertop or backsplash goes on.
Call (844) 320-5918 and we’ll walk your kitchen and give you a straight answer, free.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We pull drawers and measure plumb and level across the full run, note the box construction (plywood Vantage versus particleboard Choice) and identify whether the doors rub from hardware wear, a racked box, or both.
- 2
Repair or install. We replace worn glides and hinges with the right part for your line, re-shim racked wall cabinets square to the wall, and hang any new KraftMaid boxes level and true. Every price change is written and signed before work proceeds.
- 3
Test. Every drawer opens and closes without catching. Every door swings true and the reveals are even. We check the joints before the job is called done, not after you find it.
- 4
Warranty. You get our written 90-Day Done Right Promise on the workmanship, and we hand over the paperwork for any KraftMaid parts we ordered so your coverage stays clean.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in San Jose
We handle KraftMaid Vantage and Choice cabinets, Warminster and other raised-panel door styles, full-overlay Cherry and Maple fronts, painted finishes, and the glides and hinges that live inside all of them. That covers new cabinet installation, refacing, drawer and hinge repair, door-front replacement, and a full kitchen remodel where you’re replacing the run or working counters and backsplash around it. We also fit quartz and granite tops over existing and new KraftMaid bases. If your cabinets are a style we haven’t named here, bring a door or a photo and we’ll identify the line.
We Also Service These Brands
KraftMaid is one brand across our bench, not the only one. We work with Kohler fixtures, GAF roofing, PGT windows and doors, and Master Halco fencing, so a kitchen that needs a fixture swap and a roof that needs a second look don’t send you hunting for five different contractors. Premium brand depth across every trade we touch, and materials you can look up.
FAQs – KraftMaid Construction Service in San Jose

Is Barrett & Sons Construction San Jose authorized by KraftMaid? No. We’re an independent provider and are not authorized, sponsored or endorsed by KraftMaid. We service and install KraftMaid cabinets the same way a good independent mechanic services a brand he didn’t make: we know the product and we do the work honestly. Call (844) 320-5918 for a free estimate.
Do you use genuine KraftMaid/OEM parts? Yes, when the line and finish are still in production we order genuine KraftMaid glides, hinges and door fronts. When those parts are discontinued, we use quality aftermarket hardware and tell you plainly that’s what we’re doing and why.
How long does KraftMaid service take? Hardware and alignment work is usually a single visit, while a reface or a partial cabinet replacement runs several days depending on the run and countertop. New installation timelines depend on the KraftMaid order lead time and the rest of the kitchen scope, and we put the schedule in writing before work starts. Call (844) 320-5918 for a timeline on your job.
What KraftMaid models/series do you cover? Vantage, Choice, Classic and Warminster raised-panel styles, full-overlay Cherry and Maple fronts, and painted finishes. If you’re unsure of your line, bring a door or a photo and we’ll identify it.
Will service void my KraftMaid warranty? Proper hardware replacement with factory-matched parts doesn’t void coverage, but cutting or modifying a cabinet box the wrong way can. We keep the work warranty-safe and hand over the paperwork for the parts we order so your coverage stays clean. Call (844) 320-5918 with questions.
How much does KraftMaid construction cost in San Jose? It depends on the scope: hardware repair and alignment is a fraction of a full cabinet installation, and a kitchen remodel bundles more. Here are the ranges we work from:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,720 – $15,340 |
| Kitchen Remodel | $16,520 – $53,100 |
| Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Kitchen Island Installation | $3,540 – $11,800 |
Call (844) 320-5918 for an exact quote. Estimates are free, and a second opinion on any written estimate you already have is free too.
Book Your KraftMaid Service in San Jose, CA
Whether it’s a drawer that won’t stay on its track or a full KraftMaid run going into a San Jose remodel, we’ll walk it, price it in writing, and stand behind the work with our 90-Day Done Right Promise. Every eligible job gets permits pulled and inspections signed. Call (844) 320-5918 to schedule your free estimate.
Written by the team at Barrett & Sons Construction San Jose.












